Contact an Engineer
COTS MINIATURE ROTARY SOLENOIDS
COTS Rotary Solenoids
For standard off-the-shelf applications, Brandstrom manufactures a comprehensive line of bi-stable, self-restoring (momentary) and self-restoring 3 position solenoids. Our commercial off-the-shelf solenoids are listed below.
Need a Custom Rotary Solenoid Solution? We Engineer for Your Exact Needs. Request a custom solenoid.
7/16 Bi-stable Solenoids
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Phasellus eget quam sit amet risus finibus pretium. Cras ut augue vehicula.
| Series | Degree | Resistance | Voltage | Documents/Drawings |
| A1265-1 | 45 Degrees | 7.3Ω | 5V | Brochure (PDF) |
| A1265-2 | 45 Degrees | 55Ω | 12V | Brochure (PDF) |
| A1265-3 | 45 Degrees | 360Ω | 24V | Brochure (PDF) |
| A1264-1 | 60 Degrees | 7.3Ω | 5V | Brochure (PDF) |
| A1264-2 | 60 Degrees | 55Ω | 12V | Brochure (PDF) |
| A1264-3 | 60 Degrees | 360Ω | 24V | Brochure (PDF) |
| A1263-1 | 90 Degrees | 7.3Ω | 5V | Brochure (PDF) |
| A1263-2 | 90 Degrees | 55Ω | 12V | Brochure (PDF) |
| A1263-3 | 90 Degrees | 360Ω | 24V | Brochure (PDF) |
7/16 Self Restoring Solenoids
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Phasellus eget quam sit amet risus finibus pretium. Cras ut augue vehicula.
| Series | Degree | Resistance | Voltage | Documents/Drawings |
| A1285-1 | 30 Degrees | 27Ω | 5V | Brochure (PDF) |
| A1285-2 | 30 Degrees | 100Ω | 12V | Brochure (PDF) |
| A1285-3 | 30 Degrees | 600Ω | 24V | Brochure (PDF) |
| A1284-1 | 45 Degrees | 27Ω | 5V | Brochure (PDF) |
| A1284-2 | 45 Degrees | 100Ω | 12V | Brochure (PDF) |
| A1284-3 | 45 Degrees | 600Ω | 24V | Brochure (PDF) |
| A1283-1 | 60 Degrees | 27Ω | 5V | Brochure (PDF) |
| A1283-2 | 60 Degrees | 100Ω | 12V | Brochure (PDF) |
| A1283-3 | 60 Degrees | 600Ω | 24V | Brochure (PDF) |
Note: If using your own attachment, make sure it is no more than 10 grams in mass and is balanced about the center of rotation.
We do offer a line of standard shutters for these units.
On the ‘no flange’ unit it is designed for a pinch clamp around the thicker portion of the body (below).
This customer used a 3D printer to make their own holder.
Again, we are a custom manufacturer and as such can design around your requirements if a stock solution will not suit your needs.
You would just need to supply the geometry requirements.
Consistently meet or exceed our customer’s expectations for product quality, reliability, performance, and delivery by providing products and services of the highest possible standards and integrity.